Back7.2.1.5.(1)

ATTRIBUTION:

Functional Statement:

F20

To support and withstand expected loads and forces.

F81

To minimize the risk of malfunction, interference, damage, tampering, lack of use or misuse.

F46

To minimize the risk of contamination of potable water.

Objective:

OH2.1, OH2.3, OH2.2

 

APPLICATION:

Minimum design pressure for piping, fittings and joints used in pressure sewers, force mains or sump pump discharge applications.
This applies to buildings.

INTENT:

To limit the probability that internal pressure will lead to the failure of piping, fittings and joints, which could lead to exposure of persons to sewer waste or gases, which could lead to harm to persons.

ATTRIBUTION:

Functional Statement:

F20

To support and withstand expected loads and forces.

Objective:

OP5

 

APPLICATION:

Minimum design pressure for piping, fittings and joints used in pressure sewers, force mains or sump pump discharge applications.
This applies to buildings.

INTENT:

To limit the probability that internal pressure will lead to the failure of piping, fittings and joints, which could lead to the leakage of liquids, which could lead to damage to the building or facility.