7.2.5.5.(1)ATTRIBUTION:
Functional Statement:
F20
To support and withstand expected loads and forces.
Objective:
OH2.1, OH2.2, OH2.3
APPLICATION:
Design and installation of polyethylene water pipe,
tubing and fittings used as water service pipes, in buildings.
INTENT:
To limit the probability that polyethylene water pipe, tubing
and fittings will not meet proper standards, which could lead to such pipe,
tubing and fittings not performing in the way intended, which could lead to
failure, which could lead to unsanitary conditions, which could lead to harm
to persons.
ATTRIBUTION:
Functional Statement:
F20
To support and withstand expected loads and forces.
Objective:
OP5
APPLICATION:
Design and installation of polyethylene water pipe,
tubing and fittings used as water service pipes, in buildings.
INTENT:
To limit the probability that polyethylene water pipe, tubing
and fittings will not meet proper standards, which could lead to leakage,
which could lead to damage to the building or facility.