Back4.1.5.18.(1)

ATTRIBUTION:

Functional Statement:

F20

To support and withstand expected loads and forces.

Objective:

OS1.2

 

APPLICATION:

Specified horizontal load for the design of firewalls.
This applies to buildings described in Sentence 1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] that are required to be designed in accordance with the requirements of Part 4.

INTENT:

To limit the probability that the horizontal load for the design of firewalls will not take into account the maximum expected forces that occur during a fire, which could lead to the structural failure of or damage to the firewalls, which could lead to the spread of the fire, which could lead to harm to persons on the other side of the firewalls.
To direct Code users to other requirements in Section 4.1. specifying lateral loads on walls [e.g. wind pressure].

ATTRIBUTION:

Functional Statement:

F20

To support and withstand expected loads and forces.

Objective:

OP1.2

 

APPLICATION:

Specified horizontal load for the design of firewalls.
This applies to buildings described in Sentence 1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] that are required to be designed in accordance with the requirements of Part 4.

INTENT:

To limit the probability that the horizontal load for the design of firewalls will not take into account the maximum expected forces that occur during a fire, which could lead to the structural failure of or damage to the firewalls, which could lead to the spread of the fire from an adjacent building to the subject building, which could lead to damage to the building.
To direct Code users to other requirements in Section 4.1. specifying lateral loads on walls [e.g. wind pressure].

ATTRIBUTION:

Functional Statement:

F20

To support and withstand expected loads and forces.

Objective:

OP3.1

 

APPLICATION:

Specified horizontal load for the design of firewalls.
This applies to buildings described in Sentence 1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] that are required to be designed in accordance with the requirements of Part 4.

INTENT:

To limit the probability that the horizontal load for the design of firewalls will not take into account the maximum expected forces that occur during a fire, which could lead to the structural failure of or damage to the firewalls, which could lead to the spread of the fire from the building to an adjacent building, which could lead to damage to adjacent buildings.
To direct Code users to other requirements in Section 4.1. specifying lateral loads on walls [e.g. wind pressure].