Back6.2.9.3.(1)

ATTRIBUTION:

Functional Statement:

F01

To minimize the risk of accidental ignition.

Objective:

OS1.1

 

APPLICATION:

Clearances between combustible materials and bare pipes carrying steam or hot water, in buildings described in Sentence 1.3.3.2.(1) of Division A.
This also applies to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9], with respect to the design and installation of heating and air-conditioning systems, other than those serving individual dwelling units, as stated in Sentence 9.33.1.1.(2).

INTENT:

To limit the probability that inadequate clearances will lead to the ignition of combustible materials by heat radiating from hot pipes, which could lead to harm to persons.

ATTRIBUTION:

Functional Statement:

F01

To minimize the risk of accidental ignition.

Objective:

OP1.1

 

APPLICATION:

Clearances between combustible materials and bare pipes carrying steam or hot water, in buildings described in Sentence 1.3.3.2.(1) of Division A.
This also applies to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9], with respect to the design and installation of heating and air-conditioning systems, other than those serving individual dwelling units, as stated in Sentence 9.33.1.1.(2).

INTENT:

To limit the probability that inadequate clearances will lead to the ignition of combustible materials by heat radiating from hot pipes, which could lead to damage to the building.