6.2.11.1.(2)ATTRIBUTION:
Functional Statement:
F01
To minimize the risk of accidental ignition.
Objective:
OS1.1
APPLICATION:
Location of pipes designed to operate at a temperature
of 50°C or above in relation to stored fuel for heating systems, in buildings described in Sentence
1.3.3.2.(1) of Division A.
This also applies to buildings to which Part 9 applies [see Sentence
1.3.3.3.(1) of Division A for application
of Part 9], with respect to heating systems, other than those serving individual dwelling units, as stated in Sentence
9.33.1.1.(2).
INTENT:
To limit the probability that high-temperature pipes will
come into contact with fuel, which could lead to fire or explosion, which
could lead to harm to persons.
ATTRIBUTION:
Functional Statement:
F01
To minimize the risk of accidental ignition.
Objective:
OP1.1
APPLICATION:
Location of pipes designed to operate at a temperature
of 50°C or above in relation to stored fuel for heating systems, in buildings described in Sentence
1.3.3.2.(1) of Division A.
This also applies to buildings to which Part 9 applies [see Sentence
1.3.3.3.(1) of Division A for application
of Part 9], with respect to heating systems, other than those serving individual dwelling units, as stated in Sentence
9.33.1.1.(2).
INTENT:
To limit the probability that high-temperature pipes will
come into contact with fuel, which could lead to fire or explosion, which
could lead to damage to the building.