Back9.22.2.2.(2)

ATTRIBUTION:

Functional Statement:

F01

To minimize the risk of accidental ignition.

Objective:

OS1.1

 

APPLICATION:

Mortar for the lay-up of firebrick liners for masonry fireplaces constructed on-site, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
This also applies to fireplaces in buildings to which Part 6 applies [see Sentence 1.3.3.2.(1) of Division A for application of Part 6], as stated in Sentence 6.2.1.5.(1).

INTENT:

To limit the probability that corrosive gases, high temperatures and thermal shock due to heating and cooling will lead to the premature failure of the mortar between liner elements, which could lead to the ignition of combustible building components, which could lead to harm to persons.

ATTRIBUTION:

Functional Statement:

F01

To minimize the risk of accidental ignition.

Objective:

OP1.1

 

APPLICATION:

Mortar for the lay-up of firebrick liners for masonry fireplaces constructed on-site, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
This also applies to fireplaces in buildings to which Part 6 applies [see Sentence 1.3.3.2.(1) of Division A for application of Part 6], as stated in Sentence 6.2.1.5.(1).

INTENT:

To limit the probability that corrosive gases, high temperatures and thermal shock due to heating and cooling will lead to the premature failure of the mortar between liner elements, which could lead to the ignition of combustible building components, which could lead to damage to the building.