Back9.22.10.1.(1)

ATTRIBUTION:

Functional Statement:

F44

To limit the spread of hazardous substances beyond their point of release.

Objective:

OH1.1

 

APPLICATION:

Fireplace inserts and hearth-mounted stoves vented through the throat of masonry fireplaces constructed on-site, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
This also applies to fireplaces in buildings to which Part 6 applies [see Sentence 1.3.3.2.(1) of Division A for application of Part 6], as stated in Sentence 6.2.1.5.(1).

INTENT:

To limit the probability that the performance of fireplace inserts and hearth-mounted stoves that are vented through the throat of fireplaces will fall significantly below expectations, which could lead to the spillage of combustion products into living space, which could lead to negative effects on the air quality of indoor spaces, which could lead to harm to persons.

ATTRIBUTION:

Functional Statement:

F01

To minimize the risk of accidental ignition.

Objective:

OS1.1

 

APPLICATION:

Fireplace inserts and hearth-mounted stoves vented through the throat of masonry fireplaces constructed on-site, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
This also applies to fireplaces in buildings to which Part 6 applies [see Sentence 1.3.3.2.(1) of Division A for application of Part 6], as stated in Sentence 6.2.1.5.(1).

INTENT:

To limit the probability that the performance of fireplace inserts and hearth-mounted stoves that are vented through the throat of fireplaces will fall significantly below expectations, which could lead to the ignition of combustible building components, which could lead to harm to persons.

ATTRIBUTION:

Functional Statement:

F44

To limit the spread of hazardous substances beyond their point of release.

Objective:

OS3.4

 

APPLICATION:

Fireplace inserts and hearth-mounted stoves vented through the throat of masonry fireplaces constructed on-site, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
This also applies to fireplaces in buildings to which Part 6 applies [see Sentence 1.3.3.2.(1) of Division A for application of Part 6], as stated in Sentence 6.2.1.5.(1).

INTENT:

To limit the probability that the performance of fireplace inserts and hearth-mounted stoves that are vented through the throat of fireplaces will fall significantly below expectations, which could lead to the leakage of carbon monoxide gas into living space, which could lead to the asphyxiation or acute poisoning of persons.

ATTRIBUTION:

Functional Statement:

F01

To minimize the risk of accidental ignition.

Objective:

OP1.1

 

APPLICATION:

Fireplace inserts and hearth-mounted stoves vented through the throat of masonry fireplaces constructed on-site, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].
This also applies to fireplaces in buildings to which Part 6 applies [see Sentence 1.3.3.2.(1) of Division A for application of Part 6], as stated in Sentence 6.2.1.5.(1).

INTENT:

To limit the probability that the performance of fireplace inserts and hearth-mounted stoves that are vented through the throat of fireplaces will fall significantly below expectations, which could lead to the ignition of combustible building components, which could lead to damage to the building.