Back4.1.3.3.(1)

ATTRIBUTION:

Functional Statement:

F20

To support and withstand expected loads and forces.

Objective:

OS2.1

 

APPLICATION:

Design of the structural elements of buildings against structural failure due to fatigue, in accordance with the standards described in Section 4.3., using the limit states method.
This applies to buildings described in Sentence 1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] that are required to be designed in accordance with the requirements of Part 4.

INTENT:

To limit the probability that dynamic loads due to use and occupancy, or wind, will lead to crack growth due to fatigue, which could lead to a reduction in the capacity of the structural elements of buildings such that they will be unable to resist the forces due to the maximum expected loads, which could lead to structural failure, which could lead to harm to persons.

ATTRIBUTION:

Functional Statement:

F20

To support and withstand expected loads and forces.

F22

To limit movement under expected loads and forces.

Objective:

OP2.1, OP2.4

 

APPLICATION:

Design of the structural elements of buildings against structural failure due to fatigue, in accordance with the standards described in Section 4.3., using the limit states method.
This applies to buildings described in Sentence 1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] that are required to be designed in accordance with the requirements of Part 4.

INTENT:

To limit the probability that dynamic loads due to use and occupancy, or wind, will lead to crack growth due to fatigue, which could lead to the excessive deformation of, or excessive stress in, the structural elements of the building, which could lead to damage to the building.