Back4.1.3.5.(1)

ATTRIBUTION:

Functional Statement:

F22

To limit movement under expected loads and forces.

Objective:

OP2.4

 

APPLICATION:

Design of the structural elements of buildings to limit deflection.
This applies to buildings described in Sentence 1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] that are required to be designed in accordance with the requirements of Part 4.

INTENT:

To limit the probability of the excessive deflection or excessive vibration of the structural elements, which could lead to damage to the building.

ATTRIBUTION:

Functional Statement:

F22

To limit movement under expected loads and forces.

Objective:

OP2.4

 

APPLICATION:

Design of the structural elements of buildings to limit deflection.
This applies to buildings described in Sentence 1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] that are required to be designed in accordance with the requirements of Part 4.

INTENT:

To limit the probability of the excessive deflection of the structural elements, which could impede the intended use and occupancy of the building.

ATTRIBUTION:

Functional Statement:

F22

To limit movement under expected loads and forces.

Objective:

OH4

 

APPLICATION:

Design of the structural elements of buildings to limit deflection. This applies to buildings described in Sentence 1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9] that are required to be designed in accordance with the requirements of Part 4.

INTENT:

To limit the probability of the excessive deflection of the structural elements of the building, which could lead negative effects on the psychological well-being of persons.