4.1.4.1.(5)ATTRIBUTION:
Functional Statement:
F20
To support and withstand expected loads and forces.
Objective:
OS2.1
APPLICATION:
Counteracting dead load due to partitions, in areas of buildings where partitions other than permanent partitions are shown on the drawings, or where partitions might be added in the future.
This applies to buildings described in Sentence
1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence
1.3.3.3.(1) of Division A for application
of Part 9] that are required to be designed in accordance with the requirements
of Part 4.
INTENT:
To limit the probability that counteracting temporary or
future partition loads will be included in the design calculations, which
could lead to structural failure, which could lead to harm to persons.
ATTRIBUTION:
Functional Statement:
F20
To support and withstand expected loads and forces.
F22
To limit movement under expected loads and forces.
Objective:
OP2.1, OP2.4
APPLICATION:
Counteracting dead load due to partitions, in areas of buildings where partitions other than permanent partitions are shown on the drawings, or where partitions might be added in the future.
This applies to buildings described in Sentence
1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence
1.3.3.3.(1) of Division A for application
of Part 9] that are required to be designed in accordance with the requirements
of Part 4.
INTENT:
To limit the probability that counteracting temporary or
future partition loads will be included in the design calculations, which
could lead to the excessive deformation of, or excessive stress in, structural
components, which could lead to damage to the building.