4.1.5.5.(1)ATTRIBUTION:
Functional Statement:
F20
To support and withstand expected loads and forces.
Objective:
OS2.1
APPLICATION:
Specified live loads due to use and occupancy on exterior areas of buildings that are accessible to vehicular traffic.
This applies to buildings described in Sentence
1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence
1.3.3.3.(1) of Division A for application
of Part 9] that are required to be designed in accordance with the requirements
of Part 4.
INTENT:
To limit the probability that the load on exterior areas
of buildings that are accessible to vehicular traffic will not take into account
the maximum expected accumulation of weight due to equipment, or due to rain
or snow and associated rain, as provided for in Subsection
4.1.6.,
which could lead to structural failure, which could lead to harm to persons.
ATTRIBUTION:
Functional Statement:
F20
To support and withstand expected loads and forces.
F22
To limit movement under expected loads and forces.
Objective:
OP2.1, OP2.4
APPLICATION:
Specified live loads due to use and occupancy on exterior areas of buildings that are accessible to vehicular traffic.
This applies to buildings described in Sentence
1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence
1.3.3.3.(1) of Division A for application
of Part 9] that are required to be designed in accordance with the requirements
of Part 4.
INTENT:
To limit the probability that the load on exterior areas
of buildings that are accessible to vehicular traffic will not take into account
the maximum expected accumulation of weight due to equipment, or due to rain
or snow and associated rain, as provided for in Subsection
4.1.6.,
which could lead to:
- the excessive deformation of, or excessive stress in, structural elements, which could lead to damage to the building, or
- the excessive deflection or excessive vibration of structural elements, which could impede the intended use and occupancy of the building.
ATTRIBUTION:
Functional Statement:
F22
To limit movement under expected loads and forces.
Objective:
OH4
APPLICATION:
Specified live loads due to use and occupancy on exterior areas of buildings that are accessible to vehicular traffic.
This applies to buildings described in Sentence
1.3.3.2.(1) of Division A and to buildings to which Part 9 applies [see Sentence
1.3.3.3.(1) of Division A for application
of Part 9] that are required to be designed in accordance with the requirements
of Part 4.
INTENT:
To limit the probability that the load on exterior areas
of buildings that are accessible to vehicular traffic will not take into account
the maximum expected accumulation of weight due to equipment, or due to rain
or snow and associated rain, as provided for in Subsection
4.1.6.,
which could lead to the excessive vibration or excessive deflection of structural
elements, which could lead to negative effects on the psychological well-being
of persons.