Back9.3.2.9.(2)

ATTRIBUTION:

Functional Statement:

F80

To resist deterioration resulting from expected service conditions.

F82

To minimize the risk of inadequate performance due to improper maintenance or lack of maintenance.

Objective:

OS2.3

 

APPLICATION:

Protection and visibility of foundations that are insulated or otherwise finished in a manner that could conceal a termite infestation, in localities where termites are known to occur, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].

INTENT:

To limit the probability of an inadequate resistance to termites or an inability to detect and mitigate termite infestations, which could lead to damage to wood elements, which could lead to an inability to resist expected gravity or lateral loads.
This is to limit the probability of compromised structural integrity, which could lead to:
  • structural failure, or
  • where structural wood elements support or are used in an environmental separator, the displacement or failure of required environmental separation elements, which could lead to the deterioration of building elements.
This is to limit the probability of harm to persons.

ATTRIBUTION:

Functional Statement:

F80

To resist deterioration resulting from expected service conditions.

F82

To minimize the risk of inadequate performance due to improper maintenance or lack of maintenance.

Objective:

OP2.3, OP2.4

 

APPLICATION:

Protection and visibility of foundations that are insulated or otherwise finished in a manner that could conceal a termite infestation, in localities where termites are known to occur, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].

INTENT:

To limit the probability of an inadequate resistance to termites or an inability to detect and mitigate termite infestations, which could lead to damage to wood elements, which could lead to an inability to resist expected gravity or lateral loads.
This is to limit the probability of compromised structural integrity, which could lead to:
  • structural failure,
  • where structural wood elements support or are used in an environmental separator, the displacement or failure of required environmental separation elements, which could lead to the deterioration of building elements, which could lead to further compromised structural integrity, or
  • an inability to resist expected loads, which could lead to
    • the excessive deformation or deflection of walls, or
    • the excessive deflection or vibration of floors.
This is to limit the probability of:
  • the space being unsuitable for its intended use,
  • compromised operation of windows and doors, and
  • damage to the building.

ATTRIBUTION:

Functional Statement:

F82

To minimize the risk of inadequate performance due to improper maintenance or lack of maintenance.

F80

To resist deterioration resulting from expected service conditions.

F61

To resist the ingress of precipitation, water or moisture from the exterior or from the ground.

F55

To resist the transfer of air through environmental separators.

F82

To minimize the risk of inadequate performance due to improper maintenance or lack of maintenance.

F80

To resist deterioration resulting from expected service conditions.

F61

To resist the ingress of precipitation, water or moisture from the exterior or from the ground.

Objective:

OH1.1, OH1.2, OH1.3

 

APPLICATION:

Protection and visibility of foundations that are insulated or otherwise finished in a manner that could conceal a termite infestation, in localities where termites are known to occur, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].

INTENT:

To limit the probability of an inadequate resistance to termites or an inability to detect and mitigate termite infestations, which could lead to damage to wood elements, which could lead to an inability to resist expected gravity or lateral loads.
Where structural wood elements support or are used in an environmental separator, this is to limit the probability of compromised performance of the building envelope, which could lead to:
  • condensation,
  • precipitation ingress, or
  • compromised thermal performance of components intended to provide resistance to heat transfer.
This is to limit the probability of:
  • an inadequate control of indoor air and surface temperatures, drafts, relative humidity, or water accumulation,
  • the generation of pollutants from biological growth or from materials that become unstable upon wetting, or
  • deterioration, which could lead to further compromised integrity of environmental separators.
This is to limit the probability of:
  • negative effects on the air quality of indoor spaces,
  • the inadequate thermal comfort of persons, and
  • contact with moisture.
This is to limit the probability of harm to persons.

ATTRIBUTION:

Functional Statement:

F82

To minimize the risk of inadequate performance due to improper maintenance or lack of maintenance.

F80

To resist deterioration resulting from expected service conditions.

Objective:

OH4

 

APPLICATION:

Protection and visibility of foundations that are insulated or otherwise finished in a manner that could conceal a termite infestation, in localities where termites are known to occur, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].

INTENT:

To limit the probability of an inadequate resistance to termites or an inability to detect and mitigate termite infestations, which could lead to damage to wood elements, which could lead to an inability to resist expected gravity or lateral loads.
This is to limit the probability of:
  • compromised structural integrity, or
  • where structural wood elements support or are used in an environmental separator, the displacement or failure of required environmental separation elements, which could lead to the deterioration of building elements, which could lead to compromised structural integrity.
This is to limit the probability of the deflection or vibration of floors, which could lead to negative effects on the psychological well-being of persons.

ATTRIBUTION:

Functional Statement:

F82

To minimize the risk of inadequate performance due to improper maintenance or lack of maintenance.

F80

To resist deterioration resulting from expected service conditions.

Objective:

OS3.1

 

APPLICATION:

Protection and visibility of foundations that are insulated or otherwise finished in a manner that could conceal a termite infestation, in localities where termites are known to occur, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].

INTENT:

To limit the probability of an inadequate resistance to termites or an inability to detect and mitigate termite infestations, which could lead to damage to wood elements, which could lead to an inability to resist expected gravity or lateral loads.
This is to limit the probability of:
  • compromised structural integrity, or
  • where structural wood elements support or are used in an environmental separator, the displacement or failure of required environmental separation elements, which could lead to the deterioration of building elements, which could lead to compromised structural integrity.
Where structural wood elements support or are used in floors, this is to limit the probability of excessive deflection or vibration of floors, which could lead to persons losing their balance, tripping or falling, which could lead to harm to persons.

ATTRIBUTION:

Functional Statement:

F82

To minimize the risk of inadequate performance due to improper maintenance or lack of maintenance.

F80

To resist deterioration resulting from expected service conditions.

Objective:

OS1.2

 

APPLICATION:

Protection and visibility of foundations that are insulated or otherwise finished in a manner that could conceal a termite infestation, in localities where termites are known to occur, in buildings to which Part 9 applies [see Sentence 1.3.3.3.(1) of Division A for application of Part 9].

INTENT:

To limit the probability of an inadequate resistance to termites or an inability to detect and mitigate termite infestations, which could lead to damage to wood elements, which could lead to an inability to resist expected gravity or lateral loads.
Where structural wood elements support or are used in assemblies that are required to provide fire resistance, this is to limit the probability of the compromised fire resistance of the assembly, which could lead to harm to persons.