Attribution Tables of Division B 5.11.1.1.

Table 5.11.1.1.
Objectives and Functional Statements Attributed to the Acceptable Solutions in Part 5
Forming part of Sentence 5.11.1.1.(1)
Acceptable Solutions Functional Statements and Objectives(1)
5.1.4.1. Structural and Environmental Loads
(1) (a) [F55,F61,F63-OH1.1,OH1.2,OH1.3]
[F20-OS3.1] Applies to snow fences and sloped glazing.
[F61-OH4]
(a) [F60,F61,F63-OS2.2,OS2.3]
(a) [F20,F51,F55-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
(b) [F20-OS2.1] [F21,F22-OS2.3,OS2.4]
(b) [F20,F21,F22-OH1.1,OH1.2,OH1.3]
(b) [F20-OH4]
(3) [F20-OS2.1] [F21,F22-OS2.3,OS2.4]
[F20,F21,F22-OH1.1,OH1.2,OH1.3]
(4) (a) [F20-OS2.1] [F21,F22-OS2.3,OS2.4]
(a) [F20,F21,F22-OH1.1,OH1.2,OH1.3]
(b) [F20-OS2.1] [F21,F22-OS2.3,OS2.4]
(b) [F20,F21,F22-OH1.1,OH1.2,OH1.3]
(5) [F20,F21,F22-OH1.1,OH1.2,OH1.3]
(a) [F20-OS2.1,OS2.3]
(b) and (c) [F21,F22-OS2.3]
(b) and (c) [F22-OH4]
5.1.4.2. Resistance to Deterioration
(1) [F80,F81-OH1.1,OH1.2,OH1.3]
[F80,F81-OS3.1] Applies to floor assemblies.
[F80,F81-OH4] Applies to floor assemblies.
[F80,F81-OS2.3]
[F80,F81-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
5.2.1.1. Exterior Environmental Loads
(2) [F40,F20-OH1.1] [F20-OH1.2,OH1.3]
[F20-OS2.1]
5.2.1.2. Interior Environmental Loads
(1) [F51,F55,F61,F63-OH1.1,OH1.2]
[F55,F61,F63-OS2.3]
[F51,F61,F63,F55-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
5.2.1.3. Environmental Load and Transfer Calculations
(1) [F56-OH3.1] Applies to sound transmission calculations.
[F61,F51,F63,F55-OH1.1,OH1.2] [F51,F61-OH1.3] Applies to heat, air and moisture transfer calculations.
[F61,F51,F63-OS2.3] Applies to heat, air and moisture transfer calculations.
(3) [F61,F63,F55-OH1.1,OH1.2] [F61,F55-OH1.3]
[F20-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
[F20-OS2.1]
5.2.2.1. Determination of Structural Loads and Effects
(1) [F20-OS2.1] [F21,F22-OS2.3,OS2.4]
[F20,F21,F22-OH1.1,OH1.2,OH1.3]
[F20,F21,F22-OH4]
(3) [F20-OS2.1] [F21,F22-OS2.3,OS2.4]
[F20,F21,F22-OH1.1,OH1.2,OH1.3]
[F20,F21,F22-OH4]
5.2.2.2. Determination of Wind Load
(2) [F20-OS2.1] [F22-OS2.3,OS2.4]
[F20,F22-OH1.1,OH1.2,OH1.3]
[F20,F22-OH4]
(3) [F20-OS2.1] [F22-OS2.3,OS2.4]
[F20,F22-OH1.1,OH1.2,OH1.3]
[F20,F22-OH4]
5.2.2.3. Design Procedures
(1) [F20-OS2.1] [F22-OS2.3,OS2.4]
[F20,F22-OH1.1,OH1.2,OH1.3]
[F20,F22-OH4]
5.3.1.1. Required Resistance to Heat Transfer
(1) [F63-OH1.1] [F51,F63-OH1.2]
[F63-OS2.3]
[F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
5.3.1.2. Properties to Resist Heat Transfer or Dissipate Heat
(1) (a),(b) [F51,F63-OH1.1]
(c) [F51-OH1.2]
(b) and (d) [F51,F63-OS2.3]
(b) [F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
(d) [F30-OS3.1]
5.3.1.3. Location and Installation of Materials Providing Thermal Resistance
(1) [F51,F63-OH1.1]
[F63-OS2.3]
(2) [F51,F63-OH1.1,OH1.2]
[F63-OS2.3]
[F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
(3) [F51,F63-OH1.1,OH1.2] [F41-OH1.1]
[F63-OS2.3]
[F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
5.4.1.1. Required Resistance to Air Leakage
(1) (a),(b),(f) [F51,F52,F54,F55-OH1.2]
(a),(b),(c),(e) [F40,F55-OH1.1]
(c) [F55,F61,F63-OH1.3]
(c) and (d) [F61,F62,F63,F55-OS2.3]
(d) [F55,F62-OS3.1]
(f) [F55,F62-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
(2) [F40-OH1.1] [F52,F54-OH1.2] [F51,F55,F61,F63-OH1.1,OH1.2,OH1.3]
[F61,F63-OS2.3]
[F51,F55-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
5.4.1.2. Air Barrier System Properties
(1) [F55-OH1.1,OH1.2,OH1.3]
[F55-OS2.3]
[F55-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
(3) [F61,F51,F63,F55-OH1.1,OH1.2] [F55,F61-OH1.3]
[F61,F63-OS2.3]
[F61,F51,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
5.5.1.1. Required Resistance to Vapour Diffusion
(1) [F63-OH1.1,OH1.2]
[F63-OS2.3]
(2) [F63-OH1.1,OH1.2]
[F63-OS2.3]
5.5.1.2. Vapour Barrier Properties and Installation
(1) [F63-OH1.1,OH1.2]
[F63-OS2.3]
(2) [F63-OH1.1,OH1.2]
[F63-OS2.3]
(3) [F63-OH1.1,OH1.2]
[F63-OS2.3]
5.6.1.1. Required Protection from Precipitation
(1) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
5.6.1.2. Installation of Protective Materials
(1) [F61-OH1.1,OH1.2,OH1.3]
[F20-OS2.1] [F61-OS2.3]
(2) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.1,OS2.3]
(3) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
change begin(4) [F61-OH1.1,OH1.2,OH1.3]
[F62-OS2.3]change end
change begin5.6.2.1. Drainagechange end
(1) [F61,F62-OH1.1,OH1.2,OH1.3]
[F61,F62-OS2.3]
5.6.2.2. Accumulation and Disposal
(1) [F30-OS3.1]
(2) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
(3) [F61-OH1.1,OH1.2,OH1.3]
[F60-OS2.3] [F21-OS2.2]
(b) [F21-OP2.6]
(4) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
change begin(5) [F20-OS2.1, OS2.2, OS2.3]change end
5.7.1.1. Prevention of Accumulation and Ingress
(1) [F60-OH1.1,OH1.2,OH1.3]
[F60-OS2.3]
(2) [F61,F80-OH1.1,OH1.2,OH1.3]
[F61,F80-OS2.3]
(3) [F60-OH1.1,OH1.2,OH1.3]
[F60-OS2.3]
5.8.1.1. Required Drainage
(1) [F60-OH1.1,OH1.2,OH1.3] Applies to portion of Code text: “… the bottom of every exterior foundation wall and every floor-on-ground shall be provided with drainage.”
[F60-OS2.3,OS2.2] Applies to portion of Code text: “… the bottom of every exterior foundation wall and every floor-on-ground shall be provided with drainage.”
5.8.1.2. Drainage Materials and Installation
(1) [F60-OH1.1,OH1.2,OH1.3]
[F60-OS2.3] [F21-OS2.2]
5.8.2.1. Required Moisture Protection
(1) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
5.8.2.2. Protective Material and Component Properties
(2) [F61-OS2.3]
[F61-OH1.1,OH1.2,OH1.3]
(3) [F61-OS2.3]
[F61-OH1.1,OH1.2,OH1.3]
(4) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
(5) [F61-OH1.1] [F20,F61-OH1.2,OH1.3]
[F61-OS2.3]
(6) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
(7) (b) [F61-OH1.1,OH1.2,OH1.3]
(b) [F61-OS2.3]
5.8.2.3. Installation of Moisture Protection
(1) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
(2) [F61-OH1.1,OH1.2,OH1.3]
[F61-OS2.3]
5.9.1.1. Sound Transmission Class
(1) [F56-OH3.1]
5.9.1.2. Required Protection from Noise
(1) [F56-OH3.1]
(2) [F56-OH3.1]
5.10.1.1. Compliance with Applicable Standards
(1) [F51,F54,F55,F61,F63,F80-OH1.1,OH1.2] [F41,F55-OH1.1] [F55,F61,F80-OH1.3]
[F20-OS2.1] [F51,F61,F63,F80-OS2.3] [F51-OS2.5]
[F80,F61,F63-OS3.1]
[F80,F61,F63-OH4] Applies to floor assemblies.
(a) [F61,F63-OS1.4] Applies where required life safety systems are incorporated in environmental separators.
5.10.2.2. Applicable Standards
(1) [F20,F55,F61,F63-OH1.1,OH1.3] [F20,F55,F61,F63,F81-OH1.2]
[F20,F55,F61-OS2.3]
[F20,F55,F61-OP2.3]
5.10.2.4. Heat Transfer
(2) [F63-OH1.1,OH1.2]
[F63-OS2.3]
Notes to Table 5.11.1.1.:
(1) See Parts 2 and 3 of Division A.

contentHistory